 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA D Flip Flop With Set and Reset The MC10EL/100EL31 is a D flip-flop with set and reset. The device is functionally equivalent to the E131 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E131 the EL31 is ideally suited for those applications which require the ultimate in AC performance. Both set and reset inputs are asynchronous, level triggered signals. Data enters the master portion of the flip-flop when clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. MC10EL31 MC100EL31 8 1 * * * * 475ps Propagation Delay 2.8GHz Toggle Frequency 75k Internal Input Pulldown Resistors >1000V ESD Protection D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 LOGIC DIAGRAM AND PINOUT ASSIGNMENT S 1 S 8 VCC TRUTH TABLE D 2 D Flip Flop 7 Q D L H X X X S L L H L H R L L L H H CLK Z Z X X X Q L H H L Undef CLK 3 R 6 Q R 4 5 VEE Z = LOW to HIGH Transition 12/93 (c) Motorola, Inc. 1995 3-1 REV 2 MC10EL31 MC100EL31 DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol IEE VEE IIH Characteristic Power Supply Current Power Supply Voltage Input HIGH Current 10EL 100EL 10EL 100EL -4.75 -4.20 Min Typ 27 27 -5.2 -4.5 Max 32 32 -5.5 -5.5 150 -4.75 -4.20 Min 0C Typ 27 27 -5.2 -4.5 Max 32 32 -5.5 -5.5 150 -4.75 -4.20 Min 25C Typ 27 27 -5.2 -4.5 Max 32 32 -5.5 -5.5 150 -4.75 -4.20 Min 85C Typ 27 31 -5.2 -4.5 Max 32 37 -5.5 -5.5 150 Unit mA V A AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol fMAX tPLH tPHL tS tH tRR tPW tr tf Characteristic Maximum Toggle Frequency Propagation Delay to Output Setup Time Hold Time Set/Reset Recovery Minimum Pulse Width CLK, Set, Reset Output Rise/Fall Times Q (20% - 80%) CLK S, R Min 2.0 Typ 2.5 Max Min 2.2 0C Typ 2.8 Max Min 2.2 25C Typ 2.8 Max Min 2.2 85C Typ 2.8 Max Unit GHz ps 315 295 150 250 400 400 100 225 350 465 455 0 100 200 630 630 365 345 150 250 400 400 100 225 350 465 455 0 100 200 580 580 375 355 150 250 400 400 100 225 350 475 465 0 100 200 590 590 430 400 150 250 400 400 100 225 350 530 510 0 100 200 645 645 ps ps ps ps MOTOROLA 3-2 ECLinPS and ECLinPS Lite DL140 -- Rev 3 MC10EL31 MC100EL31 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 ISSUE P -A- B M 8 5 X 45 _ J 1 4 4X -B- M_ G F NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 P 0.25 (0.010) M -T- 8X C SEATING PLANE D 0.25 (0.010) M K TB S A S Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com R JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 ECLinPS and ECLinPS Lite DL140 -- Rev 3 3-3 *MC10EL31/D* MC10EL31/D MOTOROLA |
Price & Availability of MC10EL31
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |